Preactivated TentaGel Resins

²  Base Resins for Solid Phase Organic Synthesis

B1.1 Preactivated TentaGel® Resins

TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions.
The PEG spacer is in the range of MW 3000 Da.

• B1.1.1 Boc-Hydrazido TentaGel® Resins

货号	分子式	particle size	capacity	包装
S 30 137	TentaGel® S NH-NH-Boc	130 µm	0.2 - 0.3 mmol/g	1g
S 30 137	TentaGel® S NH-NH-Boc	130 µm	0.2 - 0.3 mmol/g	5g
S 30 137	TentaGel® S NH-NH-Boc	130 µm	0.2 - 0.3 mmol/g	25g
S 30 907	TentaGel® S NH-NH-Boc	90 µm	0.2 - 0.3 mmol/g	1g
S 30 907	TentaGel® S NH-NH-Boc	90 µm	0.2 - 0.3 mmol/g	5g
S 30 907	TentaGel® S NH-NH-Boc	90 µm	0.2 - 0.3 mmol/g	25g

B1.1.2 Succinimidyl Ester of TentaGel® Resins

货号	分子式	particle size	capacity	包装
S 30 135	TentaGel® S COOSu	130 µm	0.2 - 0.3 mmol/g	1g
S 30 135	TentaGel® S COOSu	130 µm	0.2 - 0.3 mmol/g	5g
S 30 135	TentaGel® S COOSu	130 µm	0.2 - 0.3 mmol/g	25g
S 30 905	TentaGel® S COOSu	90 µm	0.2 - 0.3 mmol/g	1g
S 30 905	TentaGel® S COOSu	90 µm	0.2 - 0.3 mmol/g	5g
S 30 905	TentaGel® S COOSu	90 µm	0.2 - 0.3 mmol/g	25g

B1.2 Resins with Amino Functions

• B1.2.1 Amino Functionalized Polystyrene Resins

B1.2.1.1 Aminobutyl Polystyrene Resins
The C4 chain acts as a hydrophobic spacer molecule to separate the amino function from the crosslinked matrix to increase the kinetic rates. Aminobutylated polystyrene resins can easily be derivatized by any carboxylic function according to standard methods for amide bond formation.

货号	分子式	particle size	capacity	包装
HB 045080 02	Polystyrene C4 NH₂	45 - 80 µm	0.8 - 1.3 mmol/g	5g
HB 045080 02	Polystyrene C4 NH₂	45 - 80 µm	0.8 - 1.3 mmol/g	25g
HB 045080 02	Polystyrene C4 NH₂	45 - 80 µm	0.8 - 1.3 mmol/g	100g
HB 080160 02	Polystyrene C4 NH₂	80 - 160 µm	0.8 - 1.3 mmol/g	5g
HB 080160 02	Polystyrene C4 NH₂	80 - 160 µm	0.8 - 1.3 mmol/g	25g
HB 080160 02	Polystyrene C4 NH₂	80 - 160 µm	0.8 - 1.3 mmol/g	100g
HB 125160 02	Polystyrene C4 NH₂	125 - 160 µm	0.8 - 1.3 mmol/g	5g
HB 125160 02	Polystyrene C4 NH₂	125 - 160 µm	0.8 - 1.3 mmol/g	25g
HB 125160 02	Polystyrene C4 NH₂	125 - 160 µm	0.8 - 1.3 mmol/g	100g

B1.2.1.2 Aminoethyl Polystyrene Resins
Aminoethylated polystyrene resins can easily be derivatized by any carboxylic function according to standard methods for amide bond formation. The phenethyl linkage is more stable toward acid treatment than the benzyl group.

货号	分子式	particle size	capacity	包装
HA 1 100 02	Polystyrene A NH₂	100-200 mesh	0.8 - 1.4 mmol/g	5g
HA 1 100 02	Polystyrene A NH₂	100-200 mesh	0.8 - 1.4 mmol/g	25g
HA 1 100 02	Polystyrene A NH₂	100-200 mesh	0.8 - 1.4 mmol/g	100g
HA 1 400 02	Polystyrene A NH₂	200-400 mesh	0.8 - 1.4 mmol/g	5g
HA 1 400 02	Polystyrene A NH₂	200-400 mesh	0.8 - 1.4 mmol/g	25g
HA 1 400 02	Polystyrene A NH₂	200-400 mesh	0.8 - 1.4 mmol/g	100g
HA 125160 02	Polystyrene A NH₂	125 - 160 µm	0.8 - 1.4 mmol/g	5g
HA 125160 02	Polystyrene A NH₂	125 - 160 µm	0.8 - 1.4 mmol/g	25g
HA 125160 02	Polystyrene A NH₂	125 - 160 µm	0.8 - 1.4 mmol/g	100g
HA 160200 02	Polystyrene A NH₂	160 - 200 µm	0.8 - 1.3 mmol/g	5g
HA 160200 02	Polystyrene A NH₂	160 - 200 µm	0.8 - 1.3 mmol/g	25g
HA 160200 02	Polystyrene A NH₂	160 - 200 µm	0.8 - 1.3 mmol/g	100g
HA 250315 02	Polystyrene A NH₂	250 - 315 µm	0.8 - 1.2 mmol/g	5g
HA 250315 02	Polystyrene A NH₂	250 - 315 µm	0.8 - 1.2 mmol/g	25g
HA 250315 02	Polystyrene A NH₂	250 - 315 µm	0.8 - 1.2 mmol/g	100g
HA 400450 02	Polystyrene A NH₂	400 - 450 µm	0.8 - 1.2 mmol/g	5g
HA 400450 02	Polystyrene A NH₂	400 - 450 µm	0.8 - 1.2 mmol/g	25g
HA 400450 02	Polystyrene A NH₂	400 - 450 µm	0.8 - 1.2 mmol/g	100g
HA 500560 02	Polystyrene A NH₂	500 - 560 µm	0.8 - 1.2 mmol/g	5g
HA 500560 02	Polystyrene A NH₂	500 - 560 µm	0.8 - 1.2 mmol/g	25g
HA 500560 02	Polystyrene A NH₂	500 - 560 µm	0.8 - 1.2 mmol/g	100g

B1.2.1.3 Aminomethyl Resins
Aminomethylated polystyrene resins are prepared in-house from crosslinked polystyrenes by a direct aminomethylation reaction according to highly optimized protocols. Resins produced by our process are chemically defined, homogeneous and free from any additional crosslinking from the functionalization process. Aminomethylated polystyrene resins can easily be acylated with any appropriate carboxylic acid-containing linker using standard methods of amide bond formation to furnish supports for solid phase organic synthesis.

货号	分子式	particle size	capacity	包装
H 100 02	Polystyrene AM NH₂	100-200 mesh	0.8 - 1.4 mmol/g	5g
H 100 02	Polystyrene AM NH₂	100-200 mesh	0.8 - 1.4 mmol/g	25g
H 100 02	Polystyrene AM NH₂	100-200 mesh	0.8 - 1.4 mmol/g	100g
H 400 02	Polystyrene AM NH₂	100-200 mesh	0.8 - 1.4 mmol/g	5g
H 400 02	Polystyrene AM NH₂	100-200 mesh	0.8 - 1.4 mmol/g	25g
H 400 02	Polystyrene AM NH₂	100-200 mesh	0.8 - 1.4 mmol/g	100g
H 125160 02	Polystyrene AM NH₂	125 - 160 µm	0.8 - 1.4 mmol/g	5g
H 125160 02	Polystyrene AM NH₂	125 - 160 µm	0.8 - 1.4 mmol/g	25g
H 125160 02	Polystyrene AM NH₂	125 - 160 µm	0.8 - 1.4 mmol/g	100g
H 160200 02	Polystyrene AM NH₂	160 - 200 µm	0.8 - 1.3 mmol/g	5g
H 160200 02	Polystyrene AM NH₂	160 - 200 µm	0.8 - 1.3 mmol/g	25g
H 160200 02	Polystyrene AM NH₂	160 - 200 µm	0.8 - 1.3 mmol/g	100g
H 250315 02	Polystyrene AM NH₂	250 - 315 µm	0.8 - 1.2 mmol/g	5g
H 250315 02	Polystyrene AM NH₂	250 - 315 µm	0.8 - 1.2 mmol/g	25g
H 250315 02	Polystyrene AM NH₂	250 - 315 µm	0.8 - 1.2 mmol/g	100g
H 400450 02	Polystyrene AM NH₂	400 - 450 µm	0.8 - 1.2 mmol/g	5g
H 400450 02	Polystyrene AM NH₂	400 - 450 µm	0.8 - 1.2 mmol/g	25g
H 400450 02	Polystyrene AM NH₂	400 - 450 µm	0.8 - 1.2 mmol/g	100g
H 500560 02	Polystyrene AM NH₂	500 - 560 µm	0.8 - 1.2 mmol/g	5g
H 500560 02	Polystyrene AM NH₂	500 - 560 µm	0.8 - 1.2 mmol/g	25g
H 500560 02	Polystyrene AM NH₂	500 - 560 µm	0.8 - 1.2 mmol/g	100g

• B1.2.2 Amino Functionalized Resins with Polar Spacers

B1.2.2.1 HypoGel® -NH₂ Resins
"HypoGel® is a hydrophilic gel type resin which combines high capacities with good solvent compatibility. Glycol spacers with n = 5 or 10 EO units separate the reactive sites from the polystyrene matrix and modify the hydrophobic properties of the polystyrene backbone. Due to the spacer effect the functional group shows a higher mobility which results in higher kinetic rates and high resolution NMR spectra from immobilized compounds on the bead. The resin is compatible to a wide range of solvents and in contrast to polystyrene even polar solvents like methanol or ethanol can be used.
These resins show high loading and hydrophilicity between polystyrene and TentaGel®
HypoGel® is a registered Trademark of Rapp Polymere GmbH

货号	分子式	particle size	capacity	包装
SP200 110150 02	HypoGel® 200 NH₂	110 – 150 µm	0.6 – 0.9 mmol/g	5g
SP200 110150 02	HypoGel® 200 NH₂	110 – 150 µm	0.6 – 0.9 mmol/g	25g
SP200 110150 02	HypoGel® 200 NH₂	110 – 150 µm	0.6 – 0.9 mmol/g	100g
SP400 110150 02	HypoGel® 200 NH₂	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 02	HypoGel® 200 NH₂	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP400 110150 02	HypoGel® 200 NH₂	110 – 150 µm	0.5 – 0.7 mmol/g	100g

B1.2.2.2 TentaGel® NH₂ Resins
TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions. The PEG spacer is in the range of MW 3000 Da.
B1.2.2.2.1 TentaGel® HL - NH₂ High loaded TentaGel® Resins

货号	分子式	particle size	capacity	包装
HL12 132	TentaGel® HL NH₂	110 µm	0.4 - 0.6 mmol/g	1g
HL12 132	TentaGel® HL NH₂	110 µm	0.4 - 0.6 mmol/g	5g
HL12 132	TentaGel® HL NH₂	110 µm	0.4 - 0.6 mmol/g	25g
HL12 132	TentaGel® HL NH₂	110 µm	0.4 - 0.6 mmol/g	100g
HL12 162	TentaGel® HL NH₂	160 µm	0.4 - 0.6 mmol/g	1g，5g，25g，100g
HL12 902	TentaGel® HL NH₂	75 µm	0.4 - 0.6 mmol/g	1g，5g，25g，100g

B1.2.2.2.2 TentaGel® MB - NH₂ TentaGel® Macrobead Resins

货号	分子式	particle size	capacity	包装
MB 160 002	TentaGel® MB NH₂	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	1g，5g，25g，100g
MB 250 002	TentaGel® MB NH₂	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	1g，5g，25g，100g
MB 300 002	TentaGel® MB NH₂	280 - 320 µm	0.2 - 0.3 mmol/g; 3.5 nmol/bead; 65 550 beads/g	1g，5g，25g，100g

B1.2.2.2.3 TentaGel® R - NH₂ TentaGel® Research Resins
TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions. The PEG spacer is in the range of MW 3000 Da.
A special designed resin for research synthesis. Long peptide sequences (up to 100 residues), difficult sequences and PNA´s are synthesized on this support. The resin shows an increased swelling volume and a significant lower loading.

货号	分子式	particle size	capacity	包装
R 28 902	TentaGel® R NH₂	90 µm	0.18 - 0.22 mmol/g;	1g
R 28 902	TentaGel® R NH₂	90 µm	0.18 - 0.22 mmol/g;	5g
R 28 902	TentaGel® R NH₂	90 µm	0.18 - 0.22 mmol/g;	25g
R 28 902	TentaGel® R NH₂	90 µm	0.18 - 0.22 mmol/g;	100g

B1.2.2.2.4 TentaGel® S - NH₂ Standard TentaGel® Resins

货号	分子式	particle size	capacity	包装
S 30 132	TentaGel® S NH₂	130 µm	0.2 - 0.35 mmol/g;	1g
S 30 132	TentaGel® S NH₂	130 µm	0.2 - 0.35 mmol/g;	5g
S 30 132	TentaGel® S NH₂	130 µm	0.2 - 0.35 mmol/g;	25g
S 30 132	TentaGel® S NH₂	130 µm	0.2 - 0.35 mmol/g;	100g
S 30 902	TentaGel® S NH₂	90 µm	0.2 - 0.35 mmol/g;	1g
S 30 902	TentaGel® S NH₂	90 µm	0.2 - 0.35 mmol/g;	5g
S 30 902	TentaGel® S NH₂	90 µm	0.2 - 0.35 mmol/g;	25g
S 30 902	TentaGel® S NH₂	90 µm	0.2 - 0.35 mmol/g;	100g

B1.2.3 TentaGel® S - NHNH₂ Hydrazido Functionalized Resins
TentaGel® S Boc-Hydrazido
Can easily be converted to the azide by NaNO2/HCl treatment and is used for nucleophilic replacements.

货号	分子式	particle size	capacity	包装
S 30 137	TentaGel® S NH-NH-Boc	130 µm	0.2 - 0.3 mmol/g;	1g 5g 25g
S 30 907	TentaGel® S NH-NH-Boc	90 µm	0.2 - 0.3 mmol/g;	1g 5g 25g

B1.3 Resins with Aromatic Formyl Linkers

B1.3.1 Polar PEG Spacer Resins with Aromatic Formyl Linker
B1.3.1.1 HypoGel® Resins
B1.3.1.1.1 4-Formyl Phenoxy on HypoGel® Resins ( FP-linker)
HypoGel® is a hydrophilic gel type resin which combines high capacities with good solvent compatibility. Glycol spacers with n = 5 or 10 EO units separate the reactive sites from the polystyrene matrix and modify the hydrophobic properties of the polystyrene backbone. Due to the spacer effect the functional group shows a higher mobility which results in higher kinetic rates and high resolution NMR spectra from immobilized compounds on the bead. The resin is compatible to a wide range of solvents and in contrast to polystyrene even polar solvents like methanol or ethanol can be used.These resins show high loading and a hydrophilicity between polystyrene and TentaGel.
Due to the lack of amide bonds and of benzylic linkages as well as the very good swelling properties in a broad variety of solvents this resin is well suited for solid phase syntheses of secondary sulfonamides and carboxamides.

货号	分子式	particle size	capacity	包装
SP200 110150 170	HypoGel® 200 FP	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP200 110150 170	HypoGel® 200 FP	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP200 110150 170	HypoGel® 200 FP	110 – 150 µm	0.5 – 0.7 mmol/g	100g
SP400 110150 170	HypoGel® 400 FP	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 170	HypoGel® 400 FP	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP400 110150 170	HypoGel® 400 FP	110 – 150 µm	0.5 – 0.7 mmol/g	100g

B1.3.1.1.2 4-Formyl-3-Methoxy Phenoxy on HypoGel® Resins ( FMP-linker)

货号	分子式	particle size	capacity	包装
SP200 110150 160	HypoGel® 200 FMP	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP200 110150 160	HypoGel® 200 FMP	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP200 110150 160	HypoGel® 200 FMP	110 – 150 µm	0.5 – 0.7 mmol/g	100g
SP400 110150 160	HypoGel® 400 FMP	110 – 150 µm	0.4 - 0.6 mmol/g	5g
SP400 110150 160	HypoGel® 400 FMP	110 – 150 µm	0.4 - 0.6 mmol/g	25g
SP400 110150 160	HypoGel® 400 FMP	110 – 150 µm	0.4 - 0.6 mmol/g	100g

B1.3.1.2 TentaGel® Resins
4-Formyl-3-Methoxy Phenoxy on TentaGel® Resins ( FMP-linker)
TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions. The PEG spacer is in the range of MW 3000 Da.
Due to the lack of amide bonds and of benzylic linkages as well as the excellent swelling properties in a great variety of  solvents this resin is ideal for solid phase syntheses of secondary sulfonamides and carboxamides.
B1.3.1.2.1 TentaGel® HL FMP High loaded TentaGel® Resins modified with FMP linker
This highloaded version of TentaGel® combines a significantly higher capacity with the advantages of TentaGel® resins. The spacer is in the range of MW 1500 - 2000 Da.

货号	分子式	particle size	capacity	包装
HL 12 016	TentaGel® HL FMP	75 µm	0.3-0.4	1g
HL 12 016	TentaGel® HL FMP	75 µm	0.3-0.4	5g
HL 12 016	TentaGel® HL FMP	75 µm	0.3-0.4	25g
HL 12 016	TentaGel® HL FMP	75 µm	0.3-0.4	100g

B1.3.1.2.2 TentaGel® MB FMP TentaGel® Macrobeads modified with FMP linker
TentaGel® Macrobeads are highlighted by extraordinary large particle diameters and high capacities based on the TentaGel® technology and designed for single bead synthesis and single bead analysis.

货号	分子式	particle size	capacity	包装
MB 160 160	TentaGel® MB FMP	140 - 170 µm	0.35 - 0.45	1g
MB 160 160	TentaGel® MB FMP	140 - 170 µm	0.35 - 0.45	5g
MB 160 160	TentaGel® MB FMP	140 - 170 µm	0.35 - 0.45	25g
MB 160 160	TentaGel® MB FMP	140 - 170 µm	0.35 - 0.45	100g
MB 250 160	TentaGel® MB FMP	200 - 250 µm	0.2 - 0.3	1g
MB 250 160	TentaGel® MB FMP	200 - 250 µm	0.2 - 0.3	5g
MB 250 160	TentaGel® MB FMP	200 - 250 µm	0.2 - 0.3	25g
MB 250 160	TentaGel® MB FMP	200 - 250 µm	0.2 - 0.3	100g
MB 300 160	TentaGel® MB FMP	280 - 320 µm	0.2 - 0.3	1g
MB 300 160	TentaGel® MB FMP	280 - 320 µm	0.2 - 0.3	5g
MB 300 160	TentaGel® MB FMP	280 - 320 µm	0.2 - 0.3	25g
MB 300 160	TentaGel® MB FMP	280 - 320 µm	0.2 - 0.3	100g

B1.3.1.2.3 TentaGel® S FMP Standard TentaGel® Resins modified with FMP linker
Standard desin for a large number of applications, useful in batch and flow through systems.

货号	分子式	particle size	capacity	包装
S 30 016	TentaGel® S FMP	90 µm	0.2-0.25	1g
S 30 016	TentaGel® S FMP	90 µm	0.2-0.25	5g
S 30 016	TentaGel® S FMP	90 µm	0.2-0.25	25g
S 30 016	TentaGel® S FMP	90 µm	0.2-0.25	100g

B1.3.2 Polystyrene Resins
B1.3.2.1 4-Formyl Phenoxyethyl Polystyrene Resins (FP-Linker, 4-Alkoxybenzaldehyd resin)
For Boc solid phase synthesis of N-alkyl amides by reductive amination as well as for the synthesis of sulfonamides, anilides and amines, respectively. The phenethylether linkage is more stable than the acid-sensitive benzylic bond in the Wang analogous benzaldehyde resins.

货号	分子式	particle size	capacity	包装
HA 1 100 07	Polystyrene A FP	100-200 mesh	0.7 - 1.1 mmol/g	5g
HA 1 100 07	Polystyrene A FP	100-200 mesh	0.7 - 1.1 mmol/g	25g
HA 1 100 07	Polystyrene A FP	100-200 mesh	0.7 - 1.1 mmol/g	100g
HA 1 400 07	Polystyrene A FP	200-400 mesh	0.7 - 1.1 mmol/g	5g
HA 1 400 07	Polystyrene A FP	200-400 mesh	0.7 - 1.1 mmol/g	25g
HA 1 400 07	Polystyrene A FP	200-400 mesh	0.7 - 1.1 mmol/g	100g
HA 125160 07	Polystyrene A FP	125 - 160 µm	0.7 - 1.1 mmol/g	5g 25g 100g
HA 160200 07	Polystyrene A FP	160 - 200 µm	0.7 - 1.1 mmol/g	5g 25g 100g
HA 250315 07	Polystyrene A FP	250 - 315 µm	0.5 – 0.8 mmol/g	5g 25g 100g
HA 400450 07	Polystyrene A FP	400 - 450 µm	0.5 – 0.8 mmol/g	5g 25g 100g
HA 500560 07	Polystyrene A FP	500 - 560 µm	0.5 – 0.8 mmol/g	5g 25g 100g

B1.3.2.2 4-Formyl-3-Methoxy Phenoxybutyl Polystyrene Resins (FMP-Linker)
The lack of amide bonds and of benzylic linkages makes this resin ideal for solid phase synthesis of secondary sulfonamides and carboxamides.
The C4 chain acts as a hydrophobic spacer molecule to separate the aldehyde function from the crosslinked matrix to increase the kinetic rates.

货号	分子式	particle size	capacity	包装
HB 045080 08	Polystyrene C4 FMP	45 - 80 µm	0.7 - 1.0 mmol/g	5g
HB 045080 08	Polystyrene C4 FMP	45 - 80 µm	0.7 - 1.0 mmol/g	25g
HB 045080 08	Polystyrene C4 FMP	45 - 80 µm	0.7 - 1.0 mmol/g	100g
HB 080160 08	Polystyrene C4 FMP	80 - 160 µm	0.7 - 1.0 mmol/g	5g
HB 080160 08	Polystyrene C4 FMP	80 - 160 µm	0.7 - 1.0 mmol/g	25g
HB 080160 08	Polystyrene C4 FMP	80 - 160 µm	0.7 - 1.0 mmol/g	100g
HB 125160 08	Polystyrene C4 FMP	125 - 160 µm	0.7 - 1.0 mmol/g	5g 25g 100g

B1.3.2.3 4-Formyl-3-Methoxy Phenoxyethyl Polystyrene Resins (FMP-Linker)
The lack of amide bonds and of benzylic linkages makes this resin ideal for solid phase syntheses of secondary sulfonamides and carboxamides as well as of N-alkyl peptide amides.

货号	分子式	particle size	capacity	包装
HA 1 100 08	Polystyrene A FMP	100-200 mesh	0.7 - 1.1 mmol/g	5g
HA 1 100 08	Polystyrene A FMP	100-200 mesh	0.7 - 1.1 mmol/g	25g
HA 1 100 08	Polystyrene A FMP	100-200 mesh	0.7 - 1.1 mmol/g	100g
HA 1 400 08	Polystyrene A FMP	200-400 mesh	0.7 - 1.1 mmol/g	5g
HA 1 400 08	Polystyrene A FMP	200-400 mesh	0.7 - 1.1 mmol/g	25g
HA 1 400 08	Polystyrene A FMP	200-400 mesh	0.7 - 1.1 mmol/g	100g
HA 125160 08	Polystyrene A FMP	125 - 160 µm	0.7 - 1.1 mmol/g	5g 25g 100g
HA 160200 08	Polystyrene A FMP	160 - 200 µm	0.7 - 1.1 mmol/g	5g 25g 100g
HA 250315 08	Polystyrene A FMP	250 - 315 µm	0.5 - 0.8 mmol/g	5g 25g 100g
HA 400450 08	Polystyrene A FMP	400 - 450 µm	0.5 - 0.8 mmol/g	5g 25g 100g
HA 500560 08	Polystyrene A FMP	500 - 560 µm	0.5 - 0.8 mmol/g	5g 25g 100g

B1.4 Resins with Carboxy Functions

B1.4.1 Carboxy Functionalized Polystyrene Resins
B1.4.1.1 Carboxy Functionalized Aminoethyl Polystyrene Resins

货号	分子式	particle size	capacity	包装
HA 1 100 03	Polystyrene A COOH	100-200 mesh	0.8 - 1.2 mmol/g	5g
HA 1 100 03	Polystyrene A COOH	100-200 mesh	0.8 - 1.2 mmol/g	25g
HA 1 100 03	Polystyrene A COOH	100-200 mesh	0.8 - 1.2 mmol/g	100g
HA 1 400 03	Polystyrene A COOH	200-400 mesh	0.8 - 1.2 mmol/g	5g
HA 1 400 03	Polystyrene A COOH	200-400 mesh	0.8 - 1.2 mmol/g	25g
HA 1 400 03	Polystyrene A COOH	200-400 mesh	0.8 - 1.2 mmol/g	100g
HA 125160 03	Polystyrene A COOH	125 - 160 µm	0.8 - 1.2 mmol/g	5g 25g 100g
HA 160200 03	Polystyrene A COOH	160 - 200 µm	0.8 - 1.2 mmol/g	5g 25g 100g
HA 250315 03	Polystyrene A COOH	250 - 315 µm	0.8 - 1.2 mmol/g	5g 25g 100g
HA 400450 03	Polystyrene A COOH	400 - 450 µm	0.7 - 1.2 mmol/g	5g 25g 100g
HA 500560 03	Polystyrene A COOH	500 - 560 µm	0.7 - 1.2 mmol/g	5g 25g 100g

B1.4.1.2 Carboxy Functionalized Aminomethyl Polystyrene Resins
This carboxy resin is based on aminomethyl polystyrene acylated with succinic acid.

货号	分子式	particle size	capacity	包装
H 100 03	Polystyrene AM COOH	100-200 mesh	0.8 - 1.2 mmol/g	5g
H 100 03	Polystyrene AM COOH	100-200 mesh	0.8 - 1.2 mmol/g	25g
H 100 03	Polystyrene AM COOH	100-200 mesh	0.8 - 1.2 mmol/g	100g
H 400 03	Polystyrene AM COOH	200-400 mesh	0.8 - 1.2 mmol/g	5g
H 400 03	Polystyrene AM COOH	200-400 mesh	0.8 - 1.2 mmol/g	25g
H 400 03	Polystyrene AM COOH	200-400 mesh	0.8 - 1.2 mmol/g	100g
H 125160 03	Polystyrene AM COOH	125 - 160 µm	0.8 - 1.2 mmol/g	5g
H 125160 03	Polystyrene AM COOH	125 - 160 µm	0.8 - 1.2 mmol/g	5g 25g 100g
H 160200 03	Polystyrene AM COOH	160 - 200 µm	0.8 - 1.2 mmol/g	5g 25g 100g
H 160200 03	Polystyrene AM COOH	160 - 200 µm	0.8 - 1.2 mmol/g	5g 25g 100g
H 250315 03	Polystyrene AM COOH	250 - 315 µm	0.8 - 1.2 mmol/g	5g 25g 100g
H 400450 03	Polystyrene AM COOH	400 - 450 µm	0.7 - 1.2 mmol/g	5g 25g 100g
H 500560 03	Polystyrene AM COOH	500 - 560 µm	0.7 - 1.2 mmol/g	5g 25g 100g

B1.4.1.3 Carboxy Polystyrene Resins
This resin has been used as scavenger resin for amines and for the immobilization of alcohols, anilines and amines.

货号	分子式	particle size	capacity	包装
H 100 08	Carboxy Polystyrene	100-200 mesh	1.0 - 1.8 mmol/g	5g
H 100 08	Carboxy Polystyrene	100-200 mesh	1.0 - 1.8 mmol/g	25g
H 100 08	Carboxy Polystyrene	100-200 mesh	1.0 - 1.8 mmol/g	100g
H 400 08	Carboxy Polystyrene	200-400 mesh	1.0 - 1.8 mmol/g	5g
H 400 08	Carboxy Polystyrene	200-400 mesh	1.0 - 1.8 mmol/g	25g
H 400 08	Carboxy Polystyrene	200-400 mesh	1.0 - 1.8 mmol/g	100g
H 125160 08	Carboxy Polystyrene	125 - 160 µm	1.0 - 1.8 mmol/g	5g 25g 100g
H 160200 08	Carboxy Polystyrene	160 - 200 µm	1.0 - 1.8 mmol/g	5g 25g 100g
H 250315 08	Carboxy Polystyrene	250 - 315 µm	1.0 - 1.8 mmol/g	5g 25g 100g
H 400450 08	Carboxy Polystyrene	400 - 450 µm	1.0 - 1.8 mmol/g	5g 25g 100g
H 500560 08	Carboxy Polystyrene	500 - 560 µm	1.0 - 1.8 mmol/g	100g

B1.4.2 Carboxy Functionalized Resins with Polar PEG Spacers
B1.4.2.1 HypoGel® amine acylated with succinic acid
HypoGel® is a hydrophilic gel type resin which combines high capacities with good solvent compatibility. Glycol spacers with n = 5 or 10 EO units separate the reactive sites from the polystyrene matrix and modify the hydrophobic properties of the polystyrene backbone. Due to the spacer effect the functional group shows a higher mobility which results in higher kinetic rates and high resolution NMR spectra from immobilized compounds on the bead. The resin is compatible to a wide range of solvents and in contrast to polystyrene even polar solvents like methanol or ethanol can be used.
These resins show high loading and a hydrophilicity between polystyrene and TentaGel®
HypoGel® is a registered Trademark of Rapp Polymere GmbH

货号	分子式	particle size	capacity	包装
SP200 110150 03	HypoGel® 200 COOH	110 – 150 µm	0.6 – 0.9 mmol/g	5g
SP200 110150 03	HypoGel® 200 COOH	110 – 150 µm	0.6 – 0.9 mmol/g	25g
SP200 110150 03	HypoGel® 200 COOH	110 – 150 µm	0.6 – 0.9 mmol/g	100g
SP400 110150 03	HypoGel® 400 COOH	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 03	HypoGel® 400 COOH	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP400 110150 03	HypoGel® 400 COOH	110 – 150 µm	0.5 – 0.7 mmol/g	100g

B1.4.2.2 TentaGel® amine acylated with succinic acid
TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions. The PEG spacer is in the range of MW 3000 Da.
This highloaded version of TentaGel® combines a significantly higher capacity with the advantages of TentaGel® resins. The spacer is in the range of MW 1500 - 2000 Da.
B1.4.2.2.1 TentaGel® HL - COOH High loaded TentaGel® Resins

货号	分子式	particle size	capacity	包装
HL 12 133	TentaGel® HL COOH	110 µm	0.4 – 0.6 mmol/g	1g
HL 12 133	TentaGel® HL COOH	110 µm	0.4 – 0.6 mmol/g	5g
HL 12 133	TentaGel® HL COOH	110 µm	0.4 – 0.6 mmol/g	25g
HL 12 133	TentaGel® HL COOH	110 µm	0.4 – 0.6 mmol/g	100g
HL 12 903	TentaGel® HL COOH	75 µm	0.4 – 0.6 mmol/g	1g
HL 12 903	TentaGel® HL COOH	75 µm	0.4 – 0.6 mmol/g	5g
HL 12 903	TentaGel® HL COOH	75 µm	0.4 – 0.6 mmol/g	100g

B1.4.2.2.2 TentaGel® MB - COOH TentaGel® Macrobead Resins
TentaGel® Macrobeads are highlighted by extraordinary large particle diameters and high capacities based on the TentaGel® technology and designed for single bead synthesis and single bead analysis.

货号	分子式	particle size	capacity	包装
MB 160 003	TentaGel® MB COOH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	1g
MB 160 003	TentaGel® MB COOH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	5g
MB 160 003	TentaGel® MB COOH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	25g
MB 160 003	TentaGel® MB COOH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	100g
MB 250 003	TentaGel® MB COOH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	1g
MB 250 003	TentaGel® MB COOH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	5g
MB 250 003	TentaGel® MB COOH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	100g
MB 300 003	TentaGel® MB COOH	280 - 320 µm	0.2 - 0.3 mmol/g; 3.5 nmol/bead; 65 550 beads/g	100g

B1.4.2.2.3 TentaGel® S - COOH Standard TentaGel® Resins

货号	分子式	particle size	capacity	包装
S 30 133	TentaGel® S COOH	130 µm	0.2 – 0.3 mmol/g	1g
S 30 133	TentaGel® S COOH	130 µm	0.2 – 0.3 mmol/g	5g
S 30 133	TentaGel® S COOH	130 µm	0.2 – 0.3 mmol/g	25g
S 30 133	TentaGel® S COOH	130 µm	0.2 – 0.3 mmol/g	100g
S 30 903	TentaGel® S COOH	90 µm	0.2 – 0.3 mmol/g	1g
S 30 903	TentaGel® S COOH	90 µm	0.2 – 0.3 mmol/g	5g
S 30 903	TentaGel® S COOH	90 µm	0.2 – 0.3 mmol/g	100g

B1.5 Resins with Formyl Functions

B1.5.1 Formyl Functionalized Polystyrene Resins
B1.5.1.1 Formyl Functionalized Aminoethyl Polystyrene Resins
This aldehyde resin comprises of aminoethyl polystyrene acylated with 6-oxo-caproic acid.

货号	分子式	particle size	capacity	包装
HA 1 100 06	Polystyrene A CHO	100-200 mesh	0.8 - 1.2 mmol/g	5g
HA 1 100 06	Polystyrene A CHO	100-200 mesh	0.8 - 1.2 mmol/g	25g
HA 1 100 06	Polystyrene A CHO	100-200 mesh	0.8 - 1.2 mmol/g	100g
HA 1 400 06	Polystyrene A CHO	200-400 mesh	0.8 - 1.2 mmol/g	5g
HA 1 400 06	Polystyrene A CHO	200-400 mesh	0.8 - 1.2 mmol/g	25g
HA 1 400 06	Polystyrene A CHO	200-400 mesh	0.8 - 1.2 mmol/g	100g
HA 125160 06	Polystyrene A CHO	125 - 160 µm	0.8 - 1.2 mmol/g	5g
HA 125160 06	Polystyrene A CHO	125 - 160 µm	0.8 - 1.2 mmol/g	25g
HA 125160 06	Polystyrene A CHO	125 - 160 µm	0.8 - 1.2 mmol/g	100g
HA 160200 06	Polystyrene A CHO	160 - 200 µm	0.8 - 1.2 mmol/g	5g
HA 160200 06	Polystyrene A CHO	160 - 200 µm	0.8 - 1.2 mmol/g	25g
HA 160200 06	Polystyrene A CHO	160 - 200 µm	0.8 - 1.2 mmol/g	100g
HA 250315 06	Polystyrene A CHO	250 - 315 µm	0.8 - 1.2 mmol/g	5g
HA 250315 06	Polystyrene A CHO	250 - 315 µm	0.8 - 1.2 mmol/g	25g
HA 250315 06	Polystyrene A CHO	250 - 315 µm	0.8 - 1.2 mmol/g	100g
HA 400450 06	Polystyrene A CHO	400 - 450 µm	0.7 - 1.2 mmol/g	5g
HA 400450 06	Polystyrene A CHO	400 - 450 µm	0.7 - 1.2 mmol/g	25g
HA 400450 06	Polystyrene A CHO	400 - 450 µm	0.7 - 1.2 mmol/g	100g
HA 500560 06	Polystyrene A CHO	500 - 560 µm	0.7 - 1.2 mmol/g	5g
HA 500560 06	Polystyrene A CHO	500 - 560 µm	0.7 - 1.2 mmol/g	25g
HA 500560 06	Polystyrene A CHO	500 - 560 µm	0.7 - 1.2 mmol/g	100g

B1.5.1.2 Formyl Functionalized Aminomethyl Polystyrene Resins
This aldehyde resin comprises of aminomethyl polystyrene acylated with 6-oxo-caproic acid.

货号	分子式	particle size	capacity	包装
H 100 06	Polystyrene AM CHO	100-200 mesh	0.8 - 1.2 mmol/g	5g
H 100 06	Polystyrene AM CHO	100-200 mesh	0.8 - 1.2 mmol/g	25g
H 100 06	Polystyrene AM CHO	100-200 mesh	0.8 - 1.2 mmol/g	100g
H 400 06	Polystyrene AM CHO	200-400 mesh	0.8 - 1.2 mmol/g	5g
H 400 06	Polystyrene AM CHO	200-400 mesh	0.8 - 1.2 mmol/g	25g
H 400 06	Polystyrene AM CHO	200-400 mesh	0.8 - 1.2 mmol/g	100g
H 125160 06	Polystyrene AM CHO	125 - 160 µm	0.8 - 1.2 mmol/g	5g
H 125160 06	Polystyrene AM CHO	125 - 160 µm	0.8 - 1.2 mmol/g	25g
H 125160 06	Polystyrene AM CHO	125 - 160 µm	0.8 - 1.2 mmol/g	100g
H 160200 06	Polystyrene AM CHO	160 - 200 µm	0.8 - 1.0 mmol/g	5g
H 160200 06	Polystyrene AM CHO	160 - 200 µm	0.8 - 1.0 mmol/g	25g
H 160200 06	Polystyrene AM CHO	160 - 200 µm	0.8 - 1.0 mmol/g	100g
H 250315 06	Polystyrene AM CHO	250 - 315 µm	0.7 - 1.0 mmol/g	5g
H 250315 06	Polystyrene AM CHO	250 - 315 µm	0.7 - 1.0 mmol/g	25g
H 250315 06	Polystyrene AM CHO	250 - 315 µm	0.7 - 1.0 mmol/g	100g
H 400450 06	Polystyrene AM CHO	400 - 450 µm	0.7 - 1.0 mmol/g	5g
H 400450 06	Polystyrene AM CHO	400 - 450 µm	0.7 - 1.0 mmol/g	25g
H 400450 06	Polystyrene AM CHO	400 - 450 µm	0.7 - 1.0 mmol/g	100g
H 500560 06	Polystyrene AM CHO	500 - 560 µm	0.7 - 1.0 mmol/g	5g
H 500560 06	Polystyrene AM CHO	500 - 560 µm	0.7 - 1.0 mmol/g	25g
H 500560 06	Polystyrene AM CHO	500 - 560 µm	0.7 - 1.0 mmol/g	100g

B1.5.1.3 Formyl Polystyrene Resins
This "polymeric benzaldehyde" reversibly binds e.g. amines or diols. The resin has been used to prepare 2,5-disubstituted tetrahydrofurans via electrophilic rearrangement of isoxazolines produced by the [3+2] addition of nitrile oxides to resin bound alkenes and in the synthesis of new resins for chemical ligation and cyclization of unprotected peptides.

货号	分子式	particle size	capacity	包装
H 100 07	Formyl Polystyrene	100-200 mesh	0.6 – 0.9 mmol/g	5g
H 100 07	Formyl Polystyrene	100-200 mesh	0.6 – 0.9 mmol/g	25g
H 100 07	Formyl Polystyrene	100-200 mesh	0.6 – 0.9 mmol/g	100g
H 400 07	Formyl Polystyrene	200-400 mesh	0.6 – 0.9 mmol/g	5g
H 400 07	Formyl Polystyrene	200-400 mesh	0.6 – 0.9 mmol/g	25g
H 400 07	Formyl Polystyrene	200-400 mesh	0.6 – 0.9 mmol/g	100g
H 125160 07	Formyl Polystyrene	125 - 160 µm	0.6 – 0.9 mmol/g	5g
H 125160 07	Formyl Polystyrene	125 - 160 µm	0.6 – 0.9 mmol/g	25g
H 125160 07	Formyl Polystyrene	125 - 160 µm	0.6 – 0.9 mmol/g	100g
H 160200 07	Formyl Polystyrene	160 - 200 µm	0.6 – 0.9 mmol/g	5g
H 160200 07	Formyl Polystyrene	160 - 200 µm	0.6 – 0.9 mmol/g	25g
H 160200 07	Formyl Polystyrene	160 - 200 µm	0.6 – 0.9 mmol/g	100g
H 250315 07	Formyl Polystyrene	250 - 315 µm	0.4 – 0.8 mmol/g	5g
H 250315 07	Formyl Polystyrene	250 - 315 µm	0.4 – 0.8 mmol/g	25g
H 250315 07	Formyl Polystyrene	250 - 315 µm	0.4 – 0.8 mmol/g	100g
H 400450 07	Formyl Polystyrene	400 - 450 µm	0.4 – 0.8 mmol/g	5g
H 400450 07	Formyl Polystyrene	400 - 450 µm	0.4 – 0.8 mmol/g	25g
H 400450 07	Formyl Polystyrene	400 - 450 µm	0.4 – 0.8 mmol/g	100g
H 500560 07	Formyl Polystyrene	500 - 560 µm	0.3 – 0.6 mmol/g	5g
H 500560 07	Formyl Polystyrene	500 - 560 µm	0.3 – 0.6 mmol/g	25g
H 500560 07	Formyl Polystyrene	500 - 560 µm	0.3 – 0.6 mmol/g	100g

B1.5.2 Formyl Functionalized Resins with Polar PEG Spacers
B1.5.2.1 HypoGel® CHO Resins
This aldehyde resin is synthesized from HypoGel amine acylated with 6-oxo-caproic acid. The resin is useful for the reversible protection of primary amine substrates via formation of a Schiff's base.

货号	分子式	particle size	capacity	包装
SP200 110150 06	HypoGel® 200 CHO	110 – 150 µm	0.6 – 0.9 mmol/g	5g
SP200 110150 06	HypoGel® 200 CHO	110 – 150 µm	0.6 – 0.9 mmol/g	25g
SP200 110150 06	HypoGel® 200 CHO	110 – 150 µm	0.6 – 0.9 mmol/g	100g
SP400 110150 06	HypoGel® 400 CHO	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 06	HypoGel® 400 CHO	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP400 110150 06	HypoGel® 400 CHO	110 – 150 µm	0.5 – 0.7 mmol/g	100g

B1.5.2.2 TentaGel® CHO Resins
TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions. The PEG spacer is in the range of MW 3 kD
B1.5.2.2.1 TentaGel® HL CHO High loaded TentaGel Resins
This highloaded version of TentaGel® combines a significantly higher capacity with the advantages of TentaGel® resins. The spacer is in the range of MW 1500 - 2000 Da.

货号	分子式	particle size	capacity	包装
HL 12 136	TentaGel® HL CHO	110 µm	0.4 – 0.6 mmol/g	1g
HL 12 136	TentaGel® HL CHO	110 µm	0.4 – 0.6 mmol/g	5g
HL 12 136	TentaGel® HL CHO	110 µm	0.4 – 0.6 mmol/g	25g
HL 12 136	TentaGel® HL CHO	110 µm	0.4 – 0.6 mmol/g	100g
HL 12 906	TentaGel® HL CHO	75 µm	0.4 – 0.6 mmol/g	1g
HL 12 906	TentaGel® HL CHO	75 µm	0.4 – 0.6 mmol/g	5g
HL 12 906	TentaGel® HL CHO	75 µm	0.4 – 0.6 mmol/g	100g

B1.5.2.2.2 TentaGel® MB CHO Macrobead Resins
TentaGel® Macrobeads are highlighted by extraordinary large particle diameters and high capacities based on the TentaGel® technology and designed for single bead synthesis and single bead analysis.

货号	分子式	particle size	capacity	包装
MB 160 006	TentaGel® MB CHO	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	1g
MB 160 006	TentaGel® MB CHO	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	5g
MB 160 006	TentaGel® MB CHO	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	25g
MB 160 006	TentaGel® MB CHO	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	100g
MB 250 006	TentaGel® MB CHO	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	1g
MB 250 006	TentaGel® MB CHO	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	5g

B1.5.2.2.3 TentaGel® S CHO Standard TentaGel Resins

货号	分子式	particle size	capacity	包装
S 30 136	TentaGel® S CHO	130 µm	0.2 – 0.3 mmol/g	1g
S 30 136	TentaGel® S CHO	130 µm	0.2 – 0.3 mmol/g	5g
S 30 136	TentaGel® S CHO	130 µm	0.2 – 0.3 mmol/g	25g
S 30 906	TentaGel® S CHO	90 µm	0.2 – 0.3 mmol/g	1g
S 30 906	TentaGel® S CHO	90 µm	0.2 – 0.3 mmol/g	5g
S 30 906	TentaGel® S CHO	90 µm	0.2 – 0.3 mmol/g	25g

B1.6 Resins with Halogen Functions

B1.6.1 Halogen Functionalized Polystyrene Resins
B1.6.1.1 Bromo Polystyrene Resins
A functional resin for the synthesis of many different aryl based derivatives containing e.g. carboxylic acid, aldehyde, thiol, phosphine or silyl chloride groups. Treatment of this resin with nBuLi generates the intermediate for the mentioned compounds.

货号	分子式	particle size	capacity	包装
H 100 09	Bromo PS	100-200 mesh	2 - 4 mmol/g	5g
H 100 09	Bromo PS	100-200 mesh	2 - 4 mmol/g	25g
H 100 09	Bromo PS	100-200 mesh	2 - 4 mmol/g	100g
H 400 09	Bromo PS	200-400 mesh	2 - 4 mmol/g	5g
H 400 09	Bromo PS	200-400 mesh	2 - 4 mmol/g	25g
H 400 09	Bromo PS	200-400 mesh	2 - 4 mmol/g	100g

B1.6.1.2 Bromobutyl Polystyrene Resins
The Br functionality is separated by a C4 spacer from the crosslinked matrix. Due to this spacer effect the functional group shows a higher mobility which results in higher kinetic rates and high resolution NMR spectra from immobilized compounds on the bead.

货号	分子式	particle size	capacity	包装
HB 045080 01	Polystyrene C4 Br	45 - 80 µm	0.8 - 1.3 mmol/g	5g
HB 045080 01	Polystyrene C4 Br	45 - 80 µm	0.8 - 1.3 mmol/g	25g
HB 045080 01	Polystyrene C4 Br	45 - 80 µm	0.8 - 1.3 mmol/g	100g
HB 080160 01	Polystyrene C4 Br	80 - 160 µm	0.8 - 1.3 mmol/g	5g
HB 080160 01	Polystyrene C4 Br	80 - 160 µm	0.8 - 1.3 mmol/g	25g
HB 080160 01	Polystyrene C4 Br	80 - 160 µm	0.8 - 1.3 mmol/g	100g
HB 125160 01	Polystyrene C4 Br	125 - 160 µm	0.8 - 1.3 mmol/g	5g
HB 125160 01	Polystyrene C4 Br	125 - 160 µm	0.8 - 1.3 mmol/g	25g
HB 125160 01	Polystyrene C4 Br	125 - 160 µm	0.8 - 1.3 mmol/g	100g

B1.6.1.3 Bromoethyl Polystyrene Resins
These resins are alternatives to the corresponding halomethylated resins; but in comparison to the benzyl support, this resin leads to more acid-stable products due to the resulting phenethyl group.

货号	分子式	particle size	capacity	包装
HA 1 100 01	Polystyrene A Br	100-200 mesh	0.8 - 1.2 mmol/g	5g
HA 1 100 01	Polystyrene A Br	100-200 mesh	0.8 - 1.2 mmol/g	25g
HA 1 100 01	Polystyrene A Br	100-200 mesh	0.8 - 1.2 mmol/g	100g
HA 1 400 01	Polystyrene A Br	200-400 mesh	0.8 - 1.2 mmol/g	5g
HA 1 400 01	Polystyrene A Br	200-400 mesh	0.8 - 1.2 mmol/g	25g
HA 1 400 01	Polystyrene A Br	200-400 mesh	0.8 - 1.2 mmol/g	100g
HA 125160 01	Polystyrene A Br	125 - 160 µm	0.8 - 1.2 mmol/g	5g
HA 125160 01	Polystyrene A Br	125 - 160 µm	0.8 - 1.2 mmol/g	25g
HA 125160 01	Polystyrene A Br	125 - 160 µm	0.8 - 1.2 mmol/g	100g
HA 160200 01	Polystyrene A Br	160 - 200 µm	0.8 - 1.2 mmol/g	5g
HA 160200 01	Polystyrene A Br	160 - 200 µm	0.8 - 1.2 mmol/g	25g
HA 160200 01	Polystyrene A Br	160 - 200 µm	0.8 - 1.2 mmol/g	100g
HA 250315 01	Polystyrene A Br	250 - 315 µm	0.8 - 1.2 mmol/g	5g
HA 250315 01	Polystyrene A Br	250 - 315 µm	0.8 - 1.2 mmol/g	25g
HA 250315 01	Polystyrene A Br	250 - 315 µm	0.8 - 1.2 mmol/g	100g
HA 400450 01	Polystyrene A Br	400 - 450 µm	0.8 - 1.2 mmol/g	5g
HA 400450 01	Polystyrene A Br	400 - 450 µm	0.8 - 1.2 mmol/g	25g
HA 400450 01	Polystyrene A Br	400 - 450 µm	0.8 - 1.2 mmol/g	100g
HA 500560 01	Polystyrene A Br	500 - 560 µm	0.8 - 1.2 mmol/g	5g
HA 500560 01	Polystyrene A Br	500 - 560 µm	0.8 - 1.2 mmol/g	25g
HA 500560 01	Polystyrene A Br	500 - 560 µm	0.8 - 1.2 mmol/g	100g

B1.6.1.4 Merrifield Resin (Chloromethyl Polystyrene)
The Merrifield resin has in the past been the standard support for the synthesis of peptide acids by Boc strategy. Originally, the cesium salt of a protected amino acid was anchored to the chloromethyl support via nucleophilic displacement of chlorine. Although, Me4N salts, sodium salts in THF with Bu4NF catalysis and more recently zinc salts in EtOH have also been used. Cleavage is normally effected by treatment with HF or trifluoromethanesulfonic acid or by hydrogenolysis, alcohols can be released by using diisobutylaluminium hydride or LiBH4. For cleavage scavengers may be required. New isomeric trialkoxybenzylamine resins have been developed by coupling phthalimidomethyl-3,5-dimethoxyphenols to this resin followed by subsequent treatment with hydrazine, that allows DCC coupling with the carboxyl function of amino acids or peptides. The addition of alcohols can be performed by heating the corresponding potassium or sodium alkoxide and the resin in DMF. Reductive cleavage of the anchoring ester linkage was also accomplished.
Attachment of sodium dihydrocinnamate to this resin and treatment with a solution of lithium diisopropylamide (LDA) in THF formed a resin-bound zinc enolate for aldol condensations. Reductive cleavage with diisobutylaluminium hydride afforded a 1,3-diol library. The removal of b-lactams has been achieved by using aluminium chloride. Another application of this support to nonpeptides involved anchoring the cesium salts of bromo or iodobenzoic acids followed by subsequent transformation into biaryl derivatives using Suzuki coupling conditions. The products were released from the resin via nucleophilic attack with methoxide ion to give methyl esters.

货号	分子式	particle size	capacity	包装
H 100 01	Chloromethyl Polystyrene	100-200 mesh	0.8 - 1.2 mmol/g	25g
H 100 01	Chloromethyl Polystyrene	100-200 mesh	0.8 - 1.2 mmol/g	100g
H 400 01	Chloromethyl Polystyrene	200-400 mesh	0.8 - 1.2 mmol/g	25g
H 400 01	Chloromethyl Polystyrene	200-400 mesh	0.8 - 1.2 mmol/g	100g

B1.6.2 Halogen Functionalized Resins with Polar PEG Spacers
B1.6.2.1 HypoGel® Br Resins

货号	分子式	particle size	capacity	包装
SP200 110150 01	HypoGel® 200 Br	110 – 150 µm	0.6 – 0.9 mmol/g	5g
SP200 110150 01	HypoGel® 200 Br	110 – 150 µm	0.6 – 0.9 mmol/g	25g
SP200 110150 01	HypoGel® 200 Br	110 – 150 µm	0.6 – 0.9 mmol/g	100g
SP400 110150 01	HypoGel® 400 Br	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 01	HypoGel® 400 Br	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP400 110150 01	HypoGel® 400 Br	110 – 150 µm	0.5 – 0.7 mmol/g	100g

B1.6.2.2 TentaGel® Br Resins
B1.6.2.2.1 TentaGel® HL Br High loaded TentaGel Resins
This highloaded version of TentaGel® combines a significantly higher capacity with the advantages of TentaGel® resins. The spacer is in the range of MW 1500 - 2000 Da.

货号	分子式	particle size	capacity	包装
HL 12 131	TentaGel® HL Br	110 µm	0.4 – 0.6 mmol/g	1g
HL 12 131	TentaGel® HL Br	110 µm	0.4 – 0.6 mmol/g	5g
HL 12 131	TentaGel® HL Br	110 µm	0.4 – 0.6 mmol/g	25g
HL 12 131	TentaGel® HL Br	110 µm	0.4 – 0.6 mmol/g	100g
HL 12 901	TentaGel® HL Br	75 µm	0.4 – 0.6 mmol/g	1g
HL 12 901	TentaGel® HL Br	75 µm	0.4 – 0.6 mmol/g	5g
HL 12 901	TentaGel® HL Br	75 µm	0.4 – 0.6 mmol/g	25g
HL 12 901	TentaGel® HL Br	75 µm	0.4 – 0.6 mmol/g	100g

B1.6.2.2.2 TentaGel® MB Br TentaGel Macrobead Resins
TentaGel® Macrobeads are highlighted by extraordinary large particle diameters and high capacities based on the TentaGel® technology and designed for single bead synthesis and single bead analysis.

货号	分子式	particle size	capacity	包装
MB 160 001	TentaGel® MB Br	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	1g
MB 160 001	TentaGel® MB Br	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	5g
MB 160 001	TentaGel® MB Br	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	25g
MB 160 001	TentaGel® MB Br	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	100g
MB 250 001	TentaGel® MB Br	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	1g
MB 250 001	TentaGel® MB Br	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	5g

B1.6.2.2.3 TentaGel® R Br TentaGel Research Resins

货号	分子式	particle size	capacity	包装
R 28 901	TentaGel® R Br	90 µm	0.18 – 0.22 mmol/g	1g
R 28 901	TentaGel® R Br	90 µm	0.18 – 0.22 mmol/g	5g
R 28 901	TentaGel® R Br	90 µm	0.18 – 0.22 mmol/g	25g
R 28 901	TentaGel® R Br	90 µm	0.18 – 0.22 mmol/g	100g

B1.6.2.2.4 TentaGel® S Br Standard TentaGel Resins

货号	分子式	particle size	capacity	包装
S 30 131	TentaGel® S Br	130 µm	0.2 – 0.3 mmol/g	1g
S 30 131	TentaGel® S Br	130 µm	0.2 – 0.3 mmol/g	5g
S 30 131	TentaGel® S Br	130 µm	0.2 – 0.3 mmol/g	25g
S 30 131	TentaGel® S Br	130 µm	0.2 – 0.3 mmol/g	100g
S 30 901	TentaGel® S Br	90 µm	0.2 – 0.3 mmol/g	1g
S 30 901	TentaGel® S Br	90 µm	0.2 – 0.3 mmol/g	5g
S 30 901	TentaGel® S Br	90 µm	0.2 – 0.3 mmol/g	25g
S 30 901	TentaGel® S Br	90 µm	0.2 – 0.3 mmol/g	100g

B1.7 Resins with Hydroxy Functions

B1.7.1 Hydroxy Functionalized Polystyrene Resins
B1.7.1.1 Hydroxybutyl Polystyrene Resins

货号	分子式	particle size	capacity	包装
HB 045080 00	Polystyrene C4 OH	45 - 80 µm	0.8 - 1.2 mmol/g	5g
HB 045080 00	Polystyrene C4 OH	45 - 80 µm	0.8 - 1.2 mmol/g	25g
HB 045080 00	Polystyrene C4 OH	45 - 80 µm	0.8 - 1.2 mmol/g	100g
HB 080160 00	Polystyrene C4 OH	80 - 160 µm	0.8 - 1.2 mmol/g	5g
HB 080160 00	Polystyrene C4 OH	80 - 160 µm	0.8 - 1.2 mmol/g	25g
HB 080160 00	Polystyrene C4 OH	80 - 160 µm	0.8 - 1.2 mmol/g	100g

B1.7.1.2 Hydroxyethyl Polystyrene Resins

货号	分子式	particle size	capacity	包装
HA 1 100 01	Polystyrene A OH	100-200 mesh	0.8 - 1.5 mmol/g	5g
HA 1 100 01	Polystyrene A OH	100-200 mesh	0.8 - 1.5 mmol/g	25g
HA 1 100 01	Polystyrene A OH	100-200 mesh	0.8 - 1.5 mmol/g	100g
HA 1 400 01	Polystyrene A OH	200-400 mesh	0.8 - 1.5 mmol/g	5g
HA 1 400 01	Polystyrene A OH	200-400 mesh	0.8 - 1.5 mmol/g	25g
HA 1 400 01	Polystyrene A OH	200-400 mesh	0.8 - 1.5 mmol/g	100g
HA 125160 01	Polystyrene A OH	125 - 160 µm	0.8 - 1.3 mmol/g	5g
HA 125160 01	Polystyrene A OH	125 - 160 µm	0.8 - 1.3 mmol/g	25g
HA 125160 01	Polystyrene A OH	125 - 160 µm	0.8 - 1.3 mmol/g	100g
HA 160200 01	Polystyrene A OH	160 - 200 µm	0.8 - 1.3 mmol/g	5g
HA 160200 01	Polystyrene A OH	160 - 200 µm	0.8 - 1.3 mmol/g	25g
HA 160200 01	Polystyrene A OH	160 - 200 µm	0.8 - 1.3 mmol/g	100g
HA 250315 01	Polystyrene A OH	250 - 315 µm	0.8 - 1.3 mmol/g	5g
HA 250315 01	Polystyrene A OH	250 - 315 µm	0.8 - 1.3 mmol/g	25g
HA 250315 01	Polystyrene A OH	250 - 315 µm	0.8 - 1.3 mmol/g	100g
HA 400450 01	Polystyrene A OH	400 - 450 µm	0.8 - 1.3 mmol/g	5g
HA 400450 01	Polystyrene A OH	400 - 450 µm	0.8 - 1.3 mmol/g	25g
HA 400450 01	Polystyrene A OH	400 - 450 µm	0.8 - 1.3 mmol/g	100g
HA 500560 01	Polystyrene A OH	500 - 560 µm	0.8 - 1.3 mmol/g	5g
HA 500560 01	Polystyrene A OH	500 - 560 µm	0.8 - 1.3 mmol/g	25g
HA 500560 01	Polystyrene A OH	500 - 560 µm	0.8 - 1.3 mmol/g	100g

B1.7.1.3 Hydroxymethyl Polystyrene Resins

货号	分子式	particle size	capacity	包装
H 100 00	Hydroxymethyl Polystyrene	100-200 mesh	0.8 - 1.5 mmol/g	5g
H 100 00	Hydroxymethyl Polystyrene	100-200 mesh	0.8 - 1.5 mmol/g	25g
H 100 00	Hydroxymethyl Polystyrene	100-200 mesh	0.8 - 1.5 mmol/g	100g
H 400 00	Hydroxymethyl Polystyrene	200-400 mesh	0.8 - 1.5 mmol/g	5g
H 400 00	Hydroxymethyl Polystyrene	200-400 mesh	0.8 - 1.5 mmol/g	25g
H 400 00	Hydroxymethyl Polystyrene	200-400 mesh	0.8 - 1.5 mmol/g	100g

B1.7.2 Hydroxy Functionalized Resins with Polar PEG Spacers
B1.7.2.1 HypoGel® Diol

货号	分子式	particle size	capacity	包装
SP200 110150 110	HypoGel® 200 Diol	110 – 150 µm	1.2 – 1.5 mmol/g	5g
SP200 110150 110	HypoGel® 200 Diol	110 – 150 µm	1.2 – 1.5 mmol/g	25g
SP200 110150 110	HypoGel® 200 Diol	110 – 150 µm	1.2 – 1.5 mmol/g	100g
SP400 110150 110	HypoGel® 400 Diol	110 – 150 µm	0.9 – 1.3 mmol/g	5g
SP400 110150 110	HypoGel® 400 Diol	110 – 150 µm	0.9 – 1.3 mmol/g	25g
SP400 110150 110	HypoGel® 400 Diol	110 – 150 µm	0.9 – 1.3 mmol/g	100g

B1.7.2.2 HypoGel® OH Resins

货号	分子式	particle size	capacity	包装
SP200 110150 00	HypoGel® 200 OH	110 – 150 µm	0.6 – 0.9 mmol/g	5g
SP200 110150 00	HypoGel® 200 OH	110 – 150 µm	0.6 – 0.9 mmol/g	25g
SP200 110150 00	HypoGel® 200 OH	110 – 150 µm	0.6 – 0.9 mmol/g	100g
SP400 110150 00	HypoGel® 400 OH	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 00	HypoGel® 400 OH	110 – 150 µm	0.5 – 0.7 mmol/g	25g
SP400 110150 00	HypoGel® 400 OH	110 – 150 µm	0.5 – 0.7 mmol/g	100g

B1.7.2.3 TentaGel® OH Resins
B1.7.2.3.1 TentaGel® Diol

货号	分子式	particle size	capacity	包装
HL12 010	TentaGel® HL Diol	75 µm	0.6 – 0.8 mmol/g	5g
HL12 010	TentaGel® HL Diol	75 µm	0.6 – 0.8 mmol/g	25g
HL12 010	TentaGel® HL Diol	75 µm	0.6 – 0.8 mmol/g	100g

B1.7.2.3.2 TentaGel® HL OH High loaded TentaGel Resins

货号	分子式	particle size	capacity	包装
HL12 130	TentaGel® HL OH	110 µm	0.4– 0.6 mmol/g	1g
HL12 130	TentaGel® HL OH	110 µm	0.4– 0.6 mmol/g	5g
HL12 130	TentaGel® HL OH	110 µm	0.4– 0.6 mmol/g	25g
HL12 130	TentaGel® HL OH	110 µm	0.4– 0.6 mmol/g	100g
HL12 900	TentaGel® HL OH	75 µm	0.4– 0.6 mmol/g	1g
HL12 900	TentaGel® HL OH	75 µm	0.4– 0.6 mmol/g	5g
HL12 900	TentaGel® HL OH	75 µm	0.4– 0.6 mmol/g	25g
HL12 900	TentaGel® HL OH	75 µm	0.4– 0.6 mmol/g	100g

B1.7.2.3.3 TentaGel® MB OH TentaGel Macrobead Resins

货号	分子式	particle size	capacity	包装
MB 160 000	TentaGel® MB OH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	1g
MB 160 000	TentaGel® MB OH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	5g
MB 160 000	TentaGel® MB OH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	25g
MB 160 000	TentaGel® MB OH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	100g
MB 250 000	TentaGel® MB OH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	1g
MB 250 000	TentaGel® MB OH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	5g

B1.7.2.3.4 TentaGel® R OH TentaGel Research Resins

货号	分子式	particle size	capacity	包装
R28900	TentaGel® R OH	90 µm	0.18 - 0.22 mmol/g	1g
R28900	TentaGel® R OH	90 µm	0.18 - 0.22 mmol/g	5g
R28900	TentaGel® R OH	90 µm	0.18 - 0.22 mmol/g	25g
R28900	TentaGel® R OH	90 µm	0.18 - 0.22 mmol/g	100g

B1.7.2.3.5 TentaGel® S OH Standard TentaGel Resins

货号	分子式	particle size	capacity	包装
MB 30 130	TentaGel® S OH	130 µm	0.2 - 0.35 mmol/g	1g
MB 30 130	TentaGel® S OH	130 µm	0.2 - 0.35 mmol/g	5g
MB 30 130	TentaGel® S OH	130 µm	0.2 - 0.35 mmol/g	25g
MB 30 130	TentaGel® S OH	130 µm	0.2 - 0.35 mmol/g	100g
S 30 900	TentaGel® S OH	90 µm	0.2 - 0.35 mmol/g	1g
S 30 900	TentaGel® S OH	90 µm	0.2 - 0.35 mmol/g	5g
S 30 900	TentaGel® S OH	90 µm	0.2 - 0.35 mmol/g	25g
S 30 900	TentaGel® S OH	90 µm	0.2 - 0.35 mmol/g	100g

B1.8 Resins with Sulfur Containing Functions

B1.8.1 Mercapto Resins
B1.8.1.1 Mercapto Functionalized Polystyrene Resins
Mercaptoethyl Polystyrene

货号	分子式	particle size	capacity	包装
HA 100 04.0	Polystyrene A SH	100-200 mesh	0.8 - 1.5 mmol/g	1g
HA 100 04.0	Polystyrene A SH	100-200 mesh	0.8 - 1.5 mmol/g	5g
HA 100 04.0	Polystyrene A SH	100-200 mesh	0.8 - 1.5 mmol/g	25g
HA 400 04.0	Polystyrene A SH	200-400 mesh	0.8 - 1.5 mmol/g	1g
HA 400 04.0	Polystyrene A SH	200-400 mesh	0.8 - 1.5 mmol/g	5g
HA 400 04.0	Polystyrene A SH	200-400 mesh	0.8 - 1.5 mmol/g	25g

Mercaptomethyl Polystyrene

货号	分子式	particle size	capacity	包装
H 100 04.0	Polystyrene AM SH	100-200 mesh	0.8 - 1.3 mmol/g	5g
H 100 04.0	Polystyrene AM SH	100-200 mesh	0.8 - 1.3 mmol/g	25g
H 400 04.0	Polystyrene AM SH	100-200 mesh	0.8 - 1.3 mmol/g	5g
H 400 04.0	Polystyrene AM SH	200-400 mesh	0.8 - 1.3 mmol/g	25g

B1.8.1.2 Mercapto Functionalized Resins with Polar PEG Spacers
B1.8.1.2.1 HypoGel® SH Resins

货号	分子式	particle size	capacity	包装
SP200 110150 04.0	HypoGel® 200 SH	110 – 150 µm	0.6 – 0.9 mmol/g	1g
SP200 110150 04.0	HypoGel® 200 SH	110 – 150 µm	0.6 – 0.9 mmol/g	5g
SP200 110150 04.0	HypoGel® 200 SH	110 – 150 µm	0.6 – 0.9 mmol/g	25g
SP400 110150 04.0	HypoGel® 400 SH	110 – 150 µm	0.5 – 0.7 mmol/g	1g
SP400 110150 04.0	HypoGel® 400 SH	110 – 150 µm	0.5 – 0.7 mmol/g	5g
SP400 110150 04.0	HypoGel® 400 SH	110 – 150 µm	0.5 – 0.7 mmol/g	25g

B1.8.1.2.2 TentaGel® SH Resins
B1.8.1.2.2.1 TentaGel® HL SH High loaded TentaGel Thiol Resins

货号	分子式	particle size	capacity	包装
HL 12 134.0	TentaGel® HL SH	110 µm	0.4– 0.6 mmol/g	1g
HL 12 134.0	TentaGel® HL SH	110 µm	0.4– 0.6 mmol/g	5g
HL 12 134.0	TentaGel® HL SH	110 µm	0.4– 0.6 mmol/g	25g
HL 12 904.0	TentaGel® HL SH	75 µm	0.4– 0.6 mmol/g	1g
HL 12 904.0	TentaGel® HL SH	75 µm	0.4– 0.6 mmol/g	5g
HL 12 904.0	TentaGel® HL SH	75 µm	0.4– 0.6 mmol/g	25g

B1.8.1.2.2.2 TentaGel® MB SH TentaGel Macrobead Thiol

货号	分子式	particle size	capacity	包装
MB 160 004.0	TentaGel® MB SH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	1g
MB 160 004.0	TentaGel® MB SH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	5g
MB 160 004.0	TentaGel® MB SH	140 - 170 µm	0.2 - 0.3 mmol/g; 0.5 nmol/bead; 520 000 beads/g	25g
MB 250 004.0	TentaGel® MB SH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	1g
MB 250 004.0	TentaGel® MB SH	200 - 250 µm	0.2 - 0.3 mmol/g; 1.5 nmol/bead; 160 000 beads/g	5g

B1.8.1.2.2.3 TentaGel® S SH Standard TentaGel Thiol Resins

货号	分子式	particle size	capacity	包装
S 30 134.0	TentaGel® S SH	130 µm	0.2 - 0.3 mmol/g	1g
S 30 134.0	TentaGel® S SH	130 µm	0.2 - 0.3 mmol/g	5g
S 30 134.0	TentaGel® S SH	130 µm	0.2 - 0.3 mmol/g	25g
S 30 904.0	TentaGel® S SH	90 µm	0.2 - 0.3 mmol/g	1g
S 30 904.0	TentaGel® S SH	90 µm	0.2 - 0.3 mmol/g	5g
S 30 904.0	TentaGel® S SH	90 µm	0.2 - 0.3 mmol/g	25g

B1.8.2 Polymer Bound Sulfonic Acid
B1.8.2.1 Polystyrene ethyl sulfonic acid

货号	名称	particle size	capacity	包装
HA 100 0430	Polystyrene A sulfonic acid	100-200 mesh	0.8 - 1.5 mmol/g	1g
HA 100 0430	Polystyrene A sulfonic acid	100-200 mesh	0.8 - 1.5 mmol/g	5g
HA 100 0430	Polystyrene A sulfonic acid	100-200 mesh	0.8 - 1.5 mmol/g	25g
HA 400 0430	Polystyrene A sulfonic acid	200-400 mesh	0.8 - 1.5 mmol/g	1g
HA 400 0430	Polystyrene A sulfonic acid	200-400 mesh	0.8 - 1.5 mmol/g	5g
HA 400 0430	Polystyrene A sulfonic acid	200-400 mesh	0.8 - 1.5 mmol/g	25g

B1.8.2.2 Polystyrene sulfonic acid
This polymer support is an equivalent to p-toluene sulfonic acid and can be used instead of soluble organic acids for quenching or catalysis of reactions. It can be also used for scavenging and "catch and release" applications.

货号	名称	particle size	capacity	包装
H 100 0430	Polystyrene sulfonic acid	100-200 mesh	2 - 4 mmol/g	5g
H 100 0430	Polystyrene sulfonic acid	100-200 mesh	2 - 4 mmol/g	25g
H 400 0430	Polystyrene sulfonic acid	100-200 mesh	2 - 4 mmol/g	5g
H 400 0430	Polystyrene sulfonic acid	200-400 mesh	2 - 4 mmol/g	25g

B1.8.3 Polymer Bound Sulfonyl Chloride
B1.8.3.1 Polystyrene Ethyl Sulfonyl Chloride
This polymer bound alkylsulfonyl chloride resin is an equivalent to alkyl sulfonic chloride and can be used in numerous applications. When this resin is treated with nucleophiles, a variety of polymer bound sulfonates can be created ( e.g. sulfonyl azides, sulfonyl hydrazine) and subsequently used as polymeric supports, polymer bound reagents or in catalytic organic synthesis. Application in the "catch and release" strategy, where the resin catches a compound to form a polymer bound tosylate. Purifying the polymer bound tosylate by washing and subsequent treatment by a nucleophile, releases the target product from the resin. A typical application is to form polymer bound tosylates by loading alcohols to the resin. Treatment with nucleophiles like amines, imidazoles or thiols generates the corresponding sec. or tert. amines, alkylimidazoles or thioethers.

货号	名称	particle size	capacity
HA 100 0431	Polystyrene A Sulfonyl Chloride	100-200 mesh	0.8 - 1.5 mmol/g
HA 100 0431	Polystyrene A Sulfonyl Chloride	100-200 mesh	0.8 - 1.5 mmol/g
HA 100 0431	Polystyrene A Sulfonyl Chloride	100-200 mesh	0.8 - 1.5 mmol/g
HA 400 0431	Polystyrene A Sulfonyl Chloride	200-400 mesh	0.8 - 1.5 mmol/g
HA 400 0431	Polystyrene A Sulfonyl Chloride	200-400 mesh	0.8 - 1.5 mmol/g
HA 400 0431	Polystyrene A Sulfonyl Chloride	200-400 mesh	0.8 - 1.5 mmol/g
HA 125160 0431	Polystyrene A Sulfonyl Chloride	125 - 160 µm	0.8 - 1.5 mmol/g
HA 125160 0431	Polystyrene A Sulfonyl Chloride	125 - 160 µm	0.8 - 1.5 mmol/g
HA 160200 0431	Polystyrene A Sulfonyl Chloride	160 - 200 µm	0.8 - 1.5 mmol/g
HA 160200 0431	Polystyrene A Sulfonyl Chloride	160 - 200 µm	0.8 - 1.5 mmol/g
HA 160200 0431	Polystyrene A Sulfonyl Chloride	160 - 200 µm	0.8 - 1.5 mmol/g
HA 250315 0431	Polystyrene A Sulfonyl Chloride	250 - 315 µm	0.8 - 1.5 mmol/g
HA 250315 0431	Polystyrene A Sulfonyl Chloride	250 - 315 µm	0.8 - 1.5 mmol/g
HA 250315 0431	Polystyrene A Sulfonyl Chloride	250 - 315 µm	0.8 - 1.5 mmol/g
HA 400450 0431	Polystyrene A Sulfonyl Chloride	400 - 450 µm	0.7 - 1.5 mmol/g
HA 400450 0431	Polystyrene A Sulfonyl Chloride	400 - 450 µm	0.7 - 1.5 mmol/g
HA 400450 0431	Polystyrene A Sulfonyl Chloride	400 - 450 µm	0.7 - 1.5 mmol/g

B1.8.3.1.2 Polystyrene sulfonyl chloride

货号	名称	particle size	capacity	包装
H 100 0431	Polystyrene sulfonyl chloride	100-200 mesh	2 - 4 mmol/g	5g
H 100 0431	Polystyrene sulfonyl chloride	100-200 mesh	2 - 4 mmol/g	25g
H 400 0431	Polystyrene sulfonyl chloride	100-200 mesh	2 - 4 mmol/g	5g
H 400 0431	Polystyrene sulfonyl chloride	200-400 mesh	2 - 4 mmol/g	25g